XP Wireless Config
| Out of Date|
The information on this page, while still accurate, is out of date
Note: University owned laptops should be configured using their pre-installed clients
Issues with wireless on University owned laptops should be sent to the ZipSupport Center (330/972-6888)
This procedure requires Service Pack 2 to be installed (in most cases this is already taken care of).
Navigate to Control Panel and select Network Connections Choose your wireless card by right clicking on it, and choosing properties. Choose Wireless Networks Click ADD. (if you DO NOT see Wireless Networks, please see the bottom of this page.)
Network Authentication Open
Data Encryption WEP
Next, Select the Authentication tab
Change EAP type to Protected EAP (PEAP)
UNCHECK Authenticate as computer when computer info is available
UNCHECK Authenticate as guest when user or computer info is unavailable.
UNCHECK validate server certificate
Near the bottom, click configure (next to Secured password (EAP-MSCHAP v2)
UNCHECK Automatically use my Windows logon...
OK OK OK until the end. You will be prompted by this baloon notice.
Click on the baloon, you will be prompted for your UANET ID and PASSWORD
Leave the Domain Blank
You should now be connected to the university network.
If you DO NOT see the Wireless Network tab.
1. Go to the Start Menu
2. Go to Run
3. Type services.msc
4. Scroll to the bottom and find Wireless Zero Configuration
5. Right Click it and click Start
6. Try clicking Advanced Settings again under the wireless settings. It should be there.