Difference between revisions of "XP Wireless Config"

From The University of Akron Support Wiki
Jump to: navigation, search
(added header about Univ Owned Laptops)
Line 1: Line 1:
 +
== ''Note: University owned laptops should be configured using their pre-installed clients'' ==
 +
'' Issues with wireless on University owned laptops should be sent to the ZipSupport Center (330/972-6888) ''
 +
 +
 +
----
 +
 
This procedure requires SP2 to be installed.   
 
This procedure requires SP2 to be installed.   
  

Revision as of 19:52, 17 September 2007

Note: University owned laptops should be configured using their pre-installed clients

Issues with wireless on University owned laptops should be sent to the ZipSupport Center (330/972-6888)



This procedure requires SP2 to be installed.

Navigate to Control Panel and select Network Connections Choose your wireless card by right clicking on it, and choosing properties. Choose Wireless Networks Click ADD

SSID tsunami
Network Authentication Open
Data Encryption WEP

Next, Select the Authentication tab

Change EAP type to Protected EAP (PEAP)

UNCHECK Authenticate as computer when computer info is available
UNCHECK Authenticate as guest when user or computer info is unavailable.

Click Properties

UNCHECK validate server certificate

Near the bottom, click configure (next to Secured password (EAP-MSCHAP v2)

UNCHECK Automatically use my Windows logon...

OK OK OK until the end. You will be prompted by this baloon notice.


Baloon.JPG

Click on the baloon, you will be prompted for your UANET ID and PASSWORD


Save credentials.JPG

Leave the Domain Blank

You should now be connected to the university network.