Windows 8 Wireless config

From The University of Akron Support Wiki
Revision as of 20:31, 3 March 2015 by Fmu1 (Talk | contribs)

Jump to: navigation, search

These are the instructions on how to set up the Wi-Fi on Windows8

1.

Open the start screen and type in "Set up a ". On the right you should see a serach result for Set up a Connection or a network.

Win8 network1.png
2. Manually connect to a wireless network and then click next
Win8 network2.png
3. Enter the unformation as follows.
  1. If you're on the main part of campus
    1. Network Name: rootown
    2. Security Type: wpa2 enterprise
    3. Encryption Type: AES
  1. If you're in the dorms:
    1. Network Name: UARH
    2. Security Type: wpa2 enterprise
    3. Encryption Type: AES

Click next and choose Change connection settings.

Win8 network3.png
4. Click on the Secutiry tab and then click on settings about halfway down the screen.
Win8 network5.png
5.

Uncheck Verify the server's identity by validating the certificate

  1. Under the second check box, enter "wan-pri-radius.uakron.edu" (without the quotation marks).

After that, click OK until you are closed out of all the open windows.

Win8 network6.png
6. Click on the Wifi icon in the bottom right corner of the screen. From there, click on Rootown if you're on the main part of campus or UARH if you're in the dorms. Click the Connect automatically
Win8 network7.png
7. If it asks you to Continue Connecting, go ahead and click connect. This step may not happen for everybody, and if it doesn't come up then don't worry about it.
Win8 network9.png
8.

Enter in your information as follows:

  1. uanet\UANet ID (if your ID is abc123 you would enter uanet\abc123)
  2. your password

Then click OK

Win8 network10.png