Windows 10 Wi-Fi

From The University of Akron Support Wiki
Revision as of 17:49, 29 January 2016 by Has21 (Talk | contribs)

Jump to: navigation, search

These are the instructions on how to set up the Wi-Fi on Windows 10

1.

Click on the wireless network icon and click "Network settings".

Windows10 Wifi 1.jpg
2. Click on "Network and Sharing Center"
Windows10 Wifi 2.JPG
3. Click on "Set up a new network or connection"
Windows10 Wifi 3.JPG
4. Enter the unformation as follows.
  1. If you're on the main part of campus
    1. Network Name: rootown
    2. Security Type: wpa2 enterprise
    3. Encryption Type: AES
  1. If you're in the dorms:
    1. Network Name: UARH
    2. Security Type: wpa2 enterprise
    3. Encryption Type: AES

Click next and choose Change profile settings.

Wireless info.png
5. Click on the Secutiry tab and then click on settings about halfway down the screen.
Wireless network properties.png
6. Uncheck validate server certificate and then click configure near the bottom of the screen. Uncheck the only checkbox in the window that comes up
PEAP properties.png
7. At this point, click OK until you have closed out of all the windows. Open the network list in your task bar and choose Rootown. Log in with your UANet ID and Password
Windows10 Wifi 4.jpg