Difference between revisions of "Vista Wireless Config"

From The University of Akron Support Wiki
Jump to: navigation, search
Line 2: Line 2:
  
  
# Click on ''Start'' [[Image:1_vista_start.jpg|bottom]]
+
# Click on ''Start'' and type in Network and Sharing.  Hit ENTER<br>[[Image:Vistawireless1.jpg|bottom]]
# Select ''Control Panel'' [[Image:1x_vista_control_panel.jpg|bottom]]
+
# Click ''Manage Wireless Networks''<br>[[Image:Vistawireless2.jpg|bottom]]
# Under Network and Internet, select ''View Network Status and Tasks'' [[Image:2_vista_control_panel.jpg|bottom]]
+
# Click ''Add'', then, '''Add a network in range of this computer'''<br>[[Image:Vistawireless3.jpg|bottom]]
# Click ''Manage Wireless Networks''
+
# Double Click on TSUNAMI.[[Image:Vistawireless4.jpg|bottom]]
# Click ''Add''
+
# Click on the ''Additional information is required to connect to tsunami'' message.[[Image:Vistawireless5.jpg|bottom]]# The Enter Credentials box will pop up.
# Select Manually Create a Network Profile
+
# Enter the following Information
+
#*Network name: tsunami
+
#*Security type: 802.1X
+
#*Encryption type: WEP
+
# Click ''Next''
+
# Select ''Change Connection Settings''
+
# Click the ''Security'' tab in Wireless Network Properties
+
# Under network authentication method, click ''Settings''.
+
# The Authentication Method should default to EAP-MSCHAPv2). Click ''Configure''.
+
# Uncheck the box for ''Automatically Use my Windows logon name and password''.
+
# Uncheck the box for ''Validate server certificates'' at the top of the box.
+
# Click ''OK''.
+
# Click ''OK'' in Protected EAP Properties (PEAP).
+
# Click ''OK'' in tsunami Wireless Network Properties.
+
# Click ''Connect to...''
+
# Select ''tsunami'' and click ''Connect''.
+
# The connection icon in the bottom right corner of the screen will probably begin flashing a periodic message asking for additional information.
+
# Click on the ''Additional information is required to connect to tsunami'' message.
+
# The Enter Credentials box will pop up.
+
 
# Enter the [[UAnet ID]] for the User name.
 
# Enter the [[UAnet ID]] for the User name.
 
# Enter the password that for the UAnet ID.
 
# Enter the password that for the UAnet ID.
 
# '''DO NOT''' enter anything in the Logon Domain box.
 
# '''DO NOT''' enter anything in the Logon Domain box.
# Click ''OK''.
+
# Click ''OK''.yes
  
 
[[Category:HOWTO]]
 
[[Category:HOWTO]]

Revision as of 23:48, 1 October 2008

Notice.png Out of Date
The information on this page, while still accurate, is out of date


  1. Click on Start and type in Network and Sharing. Hit ENTER
    Vistawireless1.jpg
  2. Click Manage Wireless Networks
    Vistawireless2.jpg
  3. Click Add, then, Add a network in range of this computer
    Vistawireless3.jpg
  4. Double Click on TSUNAMI.Vistawireless4.jpg
  5. Click on the Additional information is required to connect to tsunami message.Vistawireless5.jpg# The Enter Credentials box will pop up.
  6. Enter the UAnet ID for the User name.
  7. Enter the password that for the UAnet ID.
  8. DO NOT enter anything in the Logon Domain box.
  9. Click OK.yes