VPN Setup

From The University of Akron Support Wiki
Revision as of 21:50, 14 March 2008 by Cjc24 (Talk | contribs)

Jump to: navigation, search

VPN CONNECTIVITY WITH THE CISCO VPN CLIENT (LINUX TOO) APPEARS TO BE DOWN ON THE MAIN VPN SERVER. YOU MUST USE THE BACKUP SERVER




Note: VPN sessions are limited to 240 minutes, then the session disconnects. Users can have their computers set to auto-reconnect.

If you experience issues with the host "vpn.uakron.edu" try using "130.101.26.149". Note that with "130.101.26.149" you will only have access to on campus resources. External sites/systems will not function (ie: AIM, Google, youtube,etc).

There are known issues with this setup in regards to some library systems (such as OhioLink and Oreilly Books Online). These issues are being reviewed by our networking teams.

Virtual Private Network is a connection that emulates that you are connected to network you are actually not connected to. This is useful in obtaining network drives such as the H: drive or accessing the Library resources.

VPN Setup Instructions

Windows Vista (Cisco VPN Client) Macintosh OSX)
Windows XP Ubuntu Linux
Windows 2000 KDE / Knetworkmanager
Windows 95/98/ME    

Setup

Windows

VISTA

Instructions for connecting to the VPN with Vista can be found here: Cisco VPN Client

XP

  1. Go to the Start button and double-click Control Panel
  2. Select Network Connection (if not show click switch to classic view)
  3. On the top left hand corner click Create new network connection
  4. Click the Next button in the new window
  5. Then click the option for Connect to the network at my workplace and click the Next button
  6. Then click the option for Virtual Private Network and click the Next button
  7. Type UAkron VPN for the company name and click the Next button
  8. Then click the option for Do not dial the initial connection and click the Next button
  9. Type the following for the host name and click the Next button
    vpn.uakron.edu
  10. Then choose your option for Create this connection for and click the Next button

]]# Click the box that says Add a shortcut to this connection on the desktop so you can access this easily

  1. Then click the Finish button


If you receive an "Error 619", try this:

  1. Click Start, then run.
  2. Type 'cmd' at the prompt
  3. A black box should open up, at this point type in:
netsh int ip reset reset.txt
  1. Alternately if you are able to enable a "DMZ" on your router, you may try that as well.


This may or may not fix the issue. In some cases this trick has shown to work.

2000

  1. Open My Computer then Control Panel then Network and Dial-Up Connections
  2. Open Make New Connection
  3. Click Next
  4. Select Connect to a private network through the Internet
  5. Click Next
  6. Select Do not dial the initial connection
  7. Click Next
  8. Type the following in the box
    vpn.uakron.edu
  9. Click Next
  10. Type in UAnet VPN in the first box
  11. Click on Add a shortcut to my desktop
  12. Click Finish

95/98/ME

  1. Click 'Start' then 'Settings' then 'Control Panel.'
  2. Once you are there, open 'Add/Remove’ Programs' then click on the 'Windows Setup' tab.
  3. Double-click on the word 'Communications' in the scroll box (if you uncheck 'Communications' you are going to have some serious problems; so if you do that by accident, click the 'Cancel' button).
  4. Once the 'Communications' window is open, scroll all the way down in the scroll box and click on the box next to 'Virtual Private Networking' only if it is not already check marked.
  5. Click 'OK' then click 'OK' again.
  6. If VPN was not already installed, it will now proceed to install it.
  7. At this point, it may ask for the Windows CDROM; if you don't have it handy, you may try to type in c:\windows\options\cabs or c:\windows\options\install or c:\windows\system when it asks where to look for the files.
  8. If this does not work, then you must get a hold of a Windows CDROM, for your version of Windows, to continue the install.
  9. Open 'My Computer' then 'Dial-Up Networking.'
  10. Open 'Make New Connection'
  11. Type in UAnet VPN in the first box
  12. Click on the arrow under 'Select a device:'
  13. Select 'Microsoft VPN Adapter'.
  14. Click 'Next'
  15. Type in vpn.uakron.edu in the box
  16. Click 'Next'
  17. Click 'Finish'
  18. Right-click on 'UAnet VPN' and then 'Create Shortcut'
  19. Click 'Yes'


All versions

You should now have an icon on the desktop that says 'UAnet VPN' somewhere in the name.

  1. To use VPN, you must first logon to the Internet (doesn't have to be dial-up to UA), and then open the icon on your desktop that has 'UAnet VPN' somewhere in the name. It will ask for your 'User name' (this is your valid UAnet ID. It is also the beginning part of your University of Akron email address) and 'Password' (the password that goes with your UAnet ID).
  2. Click 'Connect' and it should do just that (sometimes it takes almost a minute).

Macintosh OSX

Note: You must have Mac OS 10.3 or later (10.2 does not work)

Tiger (10.4)

  1. Open the Internet Connect application which is located within the Applications folder
  2. Set up a new PPTP VPN connection as configured in the box below
  3. Make sure that the Internet application or web browser that will be used is not running before connecting to the VPN server
  4. You can connect to the VPN server by selecting Connect under the status menu as demonstrated
  5. Start the Internet application or web browser after connecting to the VPN server
VPN (PPTP) configuration:
  * Configuration: UA VPN
  * Server address: 130.101.72.100
  * Acount Name: your uanet id
  * Password: your uanet password
  * Check "Show VPN status in menu bar"
Note: If the VPN is stuck in L2TP you must go to File and select New VPN Connection and there you are able to change it to PPTP

Leopard (10.5)

  *Choose  > Apple > System Preferences > click Network
  *Click Add (+) at the bottom of the network connection services list 
  *For Interface Select VPN
  *VPN Type:  PPTP
  *Service Name:  UA Akron VPN
  *Select Create
  *Configuration:  Default
  *Server Address:  130.101.72.100
  *Account name:  UAnet ID
  *Select Authentication Settings > type UAnet ID password
  *Select Show VPN Status in Menu Bar
  *Click Connect

Ubuntu Linux

Please see instructions for configuring the VPN client for Ubuntu Linux

KDE / KNetworkmanager

Please see instructions for configuring the VPN client for KDE / KNetworkmanager