OSX Wireless Config
Click once on the Airport symbol along the top of the screen.
A menu will open. In the menu you will see tsunami
Click it. A new window will open. Change the encryption from WEP to LEAP
Next, enter your UANET ID and Password into the aproperate feilds.
If clicking tsunami does not open a new window, select the Other... and fill in the information manually.
Open System Preferences and click on the Network Preference Pane
|2||Click on the Airport Connection|
|3||Click on Advanced|
|4||In the Advanced menu click on 802.1X.|
|5||Click the “+” sign at the lower left hand corner of the window. You will be asked what type of profile you wish to create. You want to select Add User Profile. For Username, enter your uanet id, Enter your uanet password in the password blank. Wireless Network should be rootown. Authentication should have PEAP enabled and nothing else checked then click ok.|
|6||When you get back to the main Network Preference Pane, click Apply and exit System Preferences.|
|7||Open System Preferences again and go back to the Network Preference pane. Click on Airport again and go back to the advanced menu. In the Airport Tab , click the “+” sign.|
|8||Enter the following information in the Rootown Profile setup. Network Name: rootown; Security is WPA2 Enterprise. For 802.1x select rootown if it is not selected, this will fill in your UserName and Password.|
|9||Finally you will be prompted to accept the Wireless Certificate. Click on Show Certificate|
|10||Now click the checkbox next to Always trust “wan-radius- sec.uakron.edu” and click continue. Finally quit System Preferences.|
|11||You can check your wireless by make sure the Wireless Indicator in the Finder Menu. It should look like this.|
If These Steps Do NOT Work Please note these steps are only for use on the 10.5.X (Leopard) system. This should work on 10.5.2 but it is highly recommended you upgrade to the newest 10.5 release(10.5 and 10.5.1 probably will not work with these steps). Sometimes Apple has trouble picking up new Enterprise Wireless Network Settings. Be sure to clear the keychain of any old tsunami login information. Also, toggling the Airport on and off sometimes will force new settings to take action. If this does not work, restarting the computer after the settings are all in place is known to be effective. As a last resort, you can go back to the user profile and also check LEAP, save the profile, and restart. This should authenticate using LEAP as a backup option. If all these steps fail, your more than welcome to contact the Support Center at 330-972-6888 or visit us at Bierce Library Room 52C.
If you are still unable to connect to Tsunami, you can try to connect to RooTown