Difference between revisions of "IOS Wireless Setup"

From The University of Akron Support Wiki
Jump to: navigation, search
 
Line 1: Line 1:
 
==Introduction==
 
==Introduction==
*Students / Faculty and Staff should connect to rootown from the steps listed. If you are a guest of the university, you should connect with [[uaguest]]
+
<p>
 
+
There are three different networks accessible while on campus:
==Connecting your iOS device to rootown==
+
*'''Roo-Secure''' is for UA students, faculty, and staff. If you have a myAkron account, this is the network you will connect to.
 +
*'''Roo-Guest''' is for guests visiting the university and for [[Gaming and Media Devices|connecting media devices to the network]]. Note that UA resources such as myAkron or Brightspace are unavailable while connected to this network.
 +
*[[Eduroam|'''eduroam''']] is for students, faculty, and staff who are visiting from other universities of the EDUroam network.<br>
 +
</p>
 +
==Connecting your iOS device to Roo-Secure==
  
 
'''Note: You must have iOS 2.0 or later to connect to the network'''
 
'''Note: You must have iOS 2.0 or later to connect to the network'''
Line 10: Line 14:
 
<td valign="top" width="39">1. </td>
 
<td valign="top" width="39">1. </td>
 
<td valign="top" width="408">Tap '''Settings'''.</td>
 
<td valign="top" width="408">Tap '''Settings'''.</td>
<td valign="top" width="151">[[Image:Ioswifi1.PNG|thumb]]</td></tr>
+
<td valign="top" width="151">[[Image:IOS Wifi Setup Step1.jpeg|thumb]]</td></tr>
 
<tr>
 
<tr>
 
<td valign="top" width="39">2. </td>
 
<td valign="top" width="39">2. </td>
 
<td valign="top" width="408">Select '''Wi-Fi'''.</td>
 
<td valign="top" width="408">Select '''Wi-Fi'''.</td>
<td valign="top" width="151">[[Image:Ioswifi2.PNG|thumb]]</td></tr>
+
<td valign="top" width="151">[[Image:IOS Wifi Setup Step2.jpeg|thumb]]</td></tr>
 
<tr>
 
<tr>
 
<td valign="top" width="39">3. </td>
 
<td valign="top" width="39">3. </td>
<td valign="top" width="408">Make sure the Wi-Fi is turned on and then select '''rootown''' or '''Roo-Secure''' for campus and '''UARH''' for the dorms.</td>
+
<td valign="top" width="408">Make sure the Wi-Fi is turned on and then select '''Roo-Secure'''.</td>
<td valign="top" width="151">[[Image:Ioswifi3.PNG|thumb]]</td></tr>
+
<td valign="top" width="151">[[Image:IOS Wifi Setup Step3.jpeg|thumb]]</td></tr>
 
<tr>
 
<tr>
 
<td valign="top" width="39">4. </td>
 
<td valign="top" width="39">4. </td>
<td valign="top" width="408">It will prompt you to enter your UAnet ID and password. After doing so tap '''Join''' to connect to rootown.</td>
+
<td valign="top" width="408">It will prompt you to enter your UAnet ID and password. After doing so tap '''Join''' to connect to Roo-Secure.</td>
<td valign="top" width="151">[[Image:Ioswifi4.PNG|thumb]]</td></tr>
+
<td valign="top" width="151">[[Image:IOS Wifi Setup Step4.jpeg|thumb]]</td></tr>
 
<tr>
 
<tr>
 
<td valign="top" width="39">5. </td>
 
<td valign="top" width="39">5. </td>
<td valign="top" width="408">'''Accept''' the certificate.</td>
+
<td valign="top" width="408">'''Trust''' the certificate.</td>
<td valign="top" width="151">[[Image:Ioswifi5.PNG|thumb]]</td></tr>
+
<td valign="top" width="151">[[Image:IOS Wifi Setup Step5.jpeg|thumb]]</td></tr>
 
<tr>
 
<tr>
 
<td valign="top" width="39">6. </td>
 
<td valign="top" width="39">6. </td>
<td valign="top" width="408">If you have successfully connected there should be a checkmark next to rootown and you should see the wireless signal icon in the top left corner</td>
+
<td valign="top" width="408">If you have successfully connected there should be a checkmark next to Roo-Secure and you should see the wireless signal icon in the top left corner.</td>
<td valign="top" width="151">[[Image:Ioswifi6.PNG|thumb]]</td></tr>
+
<td valign="top" width="151">[[Image:IOS Wifi Setup Step6.PNG|thumb]]</td></tr>
<tr>
+
<td valign="top" width="39">7. </td>
+
<td valign="top" width="408">To verify that you are connected you can select rootown on the network list and you should see an IP address that starts with 10.240.x.x on the next screen.</td>
+
<td valign="top" width="151">[[Image:Ioswifi7.PNG|thumb]]</td></tr>
+
 
+
 
</table>
 
</table>
 
<br>
 
<br>
NOTE: If you have joined the "uaguest" network before this setup and it keeps connecting to it, find the network under Settings > Wi-Fi, click on the arrow next to the network, and select "Forget This Network." This will drop the profile for "uaguest" and use your new rootown one.
+
'''NOTICE''': If you have joined the <i>"roo-guest"</i> network before this setup and it keeps connecting to it, find the network under Settings > Wi-Fi, click on the arrow next to the network, and select "Forget This Network." This will drop the profile for <i>"roo-guest"</i> and use your new Roo-Secure one.
  
 
==Connecting the iPhone/iPod Touch/iPad to your email==
 
==Connecting the iPhone/iPod Touch/iPad to your email==

Latest revision as of 13:28, 14 August 2019

Introduction

There are three different networks accessible while on campus:

  • Roo-Secure is for UA students, faculty, and staff. If you have a myAkron account, this is the network you will connect to.
  • Roo-Guest is for guests visiting the university and for connecting media devices to the network. Note that UA resources such as myAkron or Brightspace are unavailable while connected to this network.
  • eduroam is for students, faculty, and staff who are visiting from other universities of the EDUroam network.

Connecting your iOS device to Roo-Secure

Note: You must have iOS 2.0 or later to connect to the network

1. Tap Settings.
IOS Wifi Setup Step1.jpeg
2. Select Wi-Fi.
IOS Wifi Setup Step2.jpeg
3. Make sure the Wi-Fi is turned on and then select Roo-Secure.
IOS Wifi Setup Step3.jpeg
4. It will prompt you to enter your UAnet ID and password. After doing so tap Join to connect to Roo-Secure.
IOS Wifi Setup Step4.jpeg
5. Trust the certificate.
IOS Wifi Setup Step5.jpeg
6. If you have successfully connected there should be a checkmark next to Roo-Secure and you should see the wireless signal icon in the top left corner.
IOS Wifi Setup Step6.PNG


NOTICE: If you have joined the "roo-guest" network before this setup and it keeps connecting to it, find the network under Settings > Wi-Fi, click on the arrow next to the network, and select "Forget This Network." This will drop the profile for "roo-guest" and use your new Roo-Secure one.

Connecting the iPhone/iPod Touch/iPad to your email

For Students

Please click here for instructions on setting up your iPhone/iPod Touch/iPad for use with the Google Apps Student E-Mail System.

For Faculty

NOTE: You must have the iPhone 2.0 software to connect to the exchange server

  • Tap Settings
  • Tap Mail, Contacts, Calendars
  • Tap Add Account
  • Tap Microsoft Exchange
  • Enter your email address
  • Enter your username in the following format:
    • Domain: uanet
    • Username: your uanet id
    • Password: your password
  • Tap Next
  • If prompted for a Server, enter exchange.uanet.edu
  • Click Next
  • Click Save