Cisco VPN Client (Configuring)

From The University of Akron Support Wiki
Revision as of 20:09, 10 March 2009 by Cjc24 (Talk | contribs) (New page: When you start the Cisco VPN client for the first time you may need to create the profile to connect to UA's network. Image:VPN_main.gif *Click on the New button for a new profile. ...)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

When you start the Cisco VPN client for the first time you may need to create the profile to connect to UA's network.

VPN main.gif

  • Click on the New button for a new profile.
  • Click on Group Authentication and use the group name: Zipnet and the password is zippy
  • Click on the transport tab. Click on Enable Transport Tunneling and click on IPSec over UDP (NAT/PAT) Then click on the save button.

VPN create new.gifVPN create new transport.gif

After saving the profile, highlight the profile and click on connect. In the authentication box enter your [UAnetID] and password.

VPN UAnet.gif

You will see the securing communication channel and the window will minimize once negotiation is complete. To disconnect just double-click on the lock icon in the tray and click on disconnect


Vpnnew3.jpg