Difference between revisions of "Cisco VPN Client (Configuring)"

From The University of Akron Support Wiki
Jump to: navigation, search
(New page: When you start the Cisco VPN client for the first time you may need to create the profile to connect to UA's network. Image:VPN_main.gif *Click on the New button for a new profile. ...)
 
Line 1: Line 1:
 +
{{Greenbox|Cisco System VPN Client Software via Footprints |[[https://footprints.uakron.edu/MRcgi/MRlogin.pl?DL=136757DA1 Download for WINDOWS]]
 +
[[https://footprints.uakron.edu/MRcgi/MRlogin.pl?DL=216182DA1 Download for OSX]]}}
 
When you start the Cisco VPN client for the first time you may need to create the profile to connect to UA's network.
 
When you start the Cisco VPN client for the first time you may need to create the profile to connect to UA's network.
  

Revision as of 20:28, 10 March 2009

Greencheck.png Cisco System VPN Client Software via Footprints
[Download for WINDOWS]

[Download for OSX]


When you start the Cisco VPN client for the first time you may need to create the profile to connect to UA's network.

VPN main.gif

  • Click on the New button for a new profile.
  • Click on Group Authentication and use the group name: Zipnet and the password is zippy
  • Click on the transport tab. Click on Enable Transport Tunneling and click on IPSec over UDP (NAT/PAT) Then click on the save button.

VPN create new.gifVPN create new transport.gif

After saving the profile, highlight the profile and click on connect. In the authentication box enter your [UAnetID] and password.

VPN UAnet.gif

You will see the securing communication channel and the window will minimize once negotiation is complete. To disconnect just double-click on the lock icon in the tray and click on disconnect


Vpnnew3.jpg