Cisco VPN Client
Using the Cisco VPN Client
After installing the Cisco VPN client, launch the client and you will see this screen:
Click on the New button for a new profile. Click on Group Authentication and use the group name: Zipnet and the password is zippy
Now click on the transport tab. Click on Enable Transport Tunneling and click on IPSec over UDP (NAT/PAT) Then click on the save button.
After saving the profile, highlight the profile and click on connect. In the authentication box enter University username and password.
You will see the securing communication channel and the window will minimize once negotiation is complete. To disconnect just double-click on the lock icon in the tray and click on disconnect
If you need help in acquiring the client, please contact the ZipSupport Center @ 330/972-6888 or by Submitting a request via FootPrints for the software.