Cisco VPN Client

From The University of Akron Support Wiki
Revision as of 13:01, 6 September 2007 by Mrb3 (Talk | contribs) (added categories)

Jump to: navigation, search
Note: Shortly, the files should be available for download from the University software download page.

When it is available, the wiki will be updated appropriately.

Using the Cisco VPN Client

After installing the Cisco VPN client, launch the client and you will see this screen:

Error creating thumbnail: Unable to save thumbnail to destination

Click on the New button for a new profile. Click on Group Authentication and use the group name: Zipnet and the password is zippy

Now click on the transport tab. Click on Enable Transport Tunneling and click on IPSec over UDP (NAT/PAT) Then click on the save button.

Error creating thumbnail: Unable to save thumbnail to destination
Error creating thumbnail: Unable to save thumbnail to destination

After saving the profile, highlight the profile and click on connect. In the authentication box enter University username and password.

Error creating thumbnail: Unable to save thumbnail to destination


You will see the securing communication channel and the window will minimize once negotiation is complete. To disconnect just double-click on the lock icon in the tray and click on disconnect



If you need help in acquiring the client, please contact the ZipSupport Center @ 330/972-6888 or by Submitting a request via FootPrints for the software.