Cisco VPN Client

From The University of Akron Support Wiki
Revision as of 18:16, 28 August 2007 by Mrb3 (Talk | contribs)

Jump to: navigation, search

Using the Cisco VPN Client

After installing the Cisco VPN client, launch the client and you will see this screen:

Error creating thumbnail: Unable to save thumbnail to destination

Click on the New button for a new profile. Click on Group Authentication and use the group name: Zipnet and the password is zippy

Now click on the transport tab. Click on Enable Transport Tunneling and click on IPSec over UDP (NAT/PAT) Then click on the save button.

Error creating thumbnail: Unable to save thumbnail to destination
Error creating thumbnail: Unable to save thumbnail to destination

After saving the profile, highlight the profile and click on connect. In the authentication box enter University username and password.

Error creating thumbnail: Unable to save thumbnail to destination


You will see the securing communication channel and the window will minimize once negotiation is complete. To disconnect just double-click on the lock icon in the tray and click on disconnect



If you need help in acquiring the client, please contact the ZipSupport Center @ 330/972-6888 or by Submitting a request via FootPrints for the software.