Difference between revisions of "Cisco VPN Client"

From The University of Akron Support Wiki
Jump to: navigation, search
(Obtaining the Cisco Software)
Line 1: Line 1:
 
  
 
== Before you install the Cisco VPN Client ==
 
== Before you install the Cisco VPN Client ==
Line 7: Line 6:
  
 
== Obtaining the Cisco Software ==
 
== Obtaining the Cisco Software ==
Login to [https://footprints.uakron.edu FootPrints]
+
Go to [https://footprints.uakron.edu/MRcgi/MRlogin.pl?DOWHAT=JUMPTOTICKET&MR=136757&PROJECTID=1 FootPrints]
Click on the 'Search Knowledge Base' button.
+
You will need to login using your UAnetID and password.
Search for "VPN"
+
 
You should see an entry for the Cisco VPN files, this includes instructions on how to install the software.
 
You should see an entry for the Cisco VPN files, this includes instructions on how to install the software.
 
Attached to that issue is the setup file (approximately 10Mb).  
 
Attached to that issue is the setup file (approximately 10Mb).  

Revision as of 17:16, 5 December 2007

Before you install the Cisco VPN Client

If you upgraded your computer from Windows XP to Windows Vista, you will not be able to use the Cisco VPN. Cisco has documented that a clean install of Windows Vista is necessary in order for the utility to properly function.

If you are running any Vista 64-bit editions, you will not be able to use the Cisco VPN client at all. Cisco has another tool available ("Any Connect") which may work. At this time, "Any Connect" is unavailable and there is no expected date of when it will be made available to the UA campus.

Obtaining the Cisco Software

Go to FootPrints You will need to login using your UAnetID and password. You should see an entry for the Cisco VPN files, this includes instructions on how to install the software. Attached to that issue is the setup file (approximately 10Mb). The files can also be obtained in person at one of our ZipSupport Center.

Using the Cisco VPN Client

After installing the Cisco VPN client, launch the client and you will see this screen:

Error creating thumbnail: Unable to save thumbnail to destination

Click on the New button for a new profile. Click on Group Authentication and use the group name: Zipnet and the password is zippy

Note: If you experience issues with the host "vpn.uakron.edu" try using "130.101.26.149". Note that with "130.101.26.149" you will only have access to on campus resources. External sites/systems will not function (ie: AIM, Google, youtube,etc).

There are known issues with this setup in regards to some library systems (such as OhioLink and Oreilly Books Online). These issues are being reviewed by our networking teams.


Now click on the transport tab. Click on Enable Transport Tunneling and click on IPSec over UDP (NAT/PAT) Then click on the save button.

Error creating thumbnail: Unable to save thumbnail to destination
Error creating thumbnail: Unable to save thumbnail to destination

After saving the profile, highlight the profile and click on connect. In the authentication box enter University username and password.

Error creating thumbnail: Unable to save thumbnail to destination


You will see the securing communication channel and the window will minimize once negotiation is complete. To disconnect just double-click on the lock icon in the tray and click on disconnect

Error Messages

Here is a good list of error codes you may receive with the VPN Client: http://www.ucl.ac.uk/is/roamnet/vpn-errordict.pdf



If you need help in acquiring the client, please contact the ZipSupport Center @ 330/972-6888 or by Submitting a request via FootPrints for the software.