Difference between revisions of "Cisco VPN Client"

From The University of Akron Support Wiki
Jump to: navigation, search
 
Line 1: Line 1:
 
== Using the Cisco VPN Client ==
 
== Using the Cisco VPN Client ==
 
+
After installing the Cisco VPN client, launch the client and you will see this screen:
 
[[Image:VPN_main.gif]]
 
[[Image:VPN_main.gif]]
  
After installing the Cisco VPN Client, click on the New button for a new profile.  
+
Click on the New button for a new profile.  
 
Click on Group Authentication and use the group name: Zipnet and the password is zippy
 
Click on Group Authentication and use the group name: Zipnet and the password is zippy
  
[[Image:VPN_create_new.gif]]
+
Now click on the transport tab.
 +
Click on Enable Transport Tunneling and click on IPSec over UDP (NAT/PAT) Then click on the save button.
 +
 
 +
[[Image:VPN_create_new.gif]][[Image:VPN_create_new_transport.gif]]
  
 
After saving the profile, highlight the profile and click on connect. In the authentication box enter University username and password.  
 
After saving the profile, highlight the profile and click on connect. In the authentication box enter University username and password.  
Line 14: Line 17:
  
 
You will see the securing communication channel and the window will minimize once negotiation is complete. To disconnect just double-click on the lock icon in the tray and click on disconnect
 
You will see the securing communication channel and the window will minimize once negotiation is complete. To disconnect just double-click on the lock icon in the tray and click on disconnect
 +
 +
 +
----
 +
 +
If you need help in acquiring the client, please contact the ZipSupport Center @ 330/972-6888 or by Submitting a request via [https://footprints.uakron.edu FootPrints] for the software.

Revision as of 18:16, 28 August 2007

Using the Cisco VPN Client

After installing the Cisco VPN client, launch the client and you will see this screen:

Error creating thumbnail: Unable to save thumbnail to destination

Click on the New button for a new profile. Click on Group Authentication and use the group name: Zipnet and the password is zippy

Now click on the transport tab. Click on Enable Transport Tunneling and click on IPSec over UDP (NAT/PAT) Then click on the save button.

Error creating thumbnail: Unable to save thumbnail to destination
Error creating thumbnail: Unable to save thumbnail to destination

After saving the profile, highlight the profile and click on connect. In the authentication box enter University username and password.

Error creating thumbnail: Unable to save thumbnail to destination


You will see the securing communication channel and the window will minimize once negotiation is complete. To disconnect just double-click on the lock icon in the tray and click on disconnect



If you need help in acquiring the client, please contact the ZipSupport Center @ 330/972-6888 or by Submitting a request via FootPrints for the software.