Difference between revisions of "Cisco VPN Client"

From The University of Akron Support Wiki
Jump to: navigation, search
Line 46: Line 46:
 
# type:  cd %systemroot%\system32
 
# type:  cd %systemroot%\system32
 
# type:  regsvr32 vbscript.dll
 
# type:  regsvr32 vbscript.dll
 +
 +
 +
'''Error 442'''
 +
To work around error 442, try the following steps to resolve the issue:
 +
# Open "Network and Sharing Center".
 +
# Select "Manage Network Connections".
 +
# Enable the Virtual Adapter ("VA"—Cisco VPN Adapter).
 +
# Right-click on Cisco VPN Adapter and select "Diagnose" from the context menu.
 +
# Select "Reset the network adapter Local Area Connection X".
 +
 +
 +
If this procedure does not work, run the following command from the command prompt:
 +
* reg add HLKM\System\CurrentControlSet\Services\Tcpip\Parameters /v ArpRetryCount /t REGDWORD /d 0 /f
 +
 +
 +
Then reboot.
 +
 +
 +
This resolves the issue until Vista reports a duplicate IP address again. Follow the preceding steps to resolve it again.
 +
 +
 +
If that doesn't work, run the following from cmd.
 +
* reg add HKLM\System\CurrentControlSet\Services\Tcpip\Parameters /v ArpRetryCount /t REG_DWORD /d 0 /f
 +
  
 
----
 
----

Revision as of 14:13, 15 May 2008

Before you install the Cisco VPN Client

If you upgraded your computer from Windows XP to Windows Vista, you will not be able to use the Cisco VPN. Cisco has documented that a clean install of Windows Vista is necessary in order for the utility to properly function.

If you are running any Vista 64-bit editions, you will not be able to use the Cisco VPN client at all. Cisco has another tool available ("Any Connect") which may work. At this time, "Any Connect" is unavailable and there is no expected date of when it will be made available to the UA campus.

Getting and installing the Cisco VPN Client Software

Go to FootPrints (Click here to download) You will need to login using your UAnetID and password. You should see an entry for the Cisco VPN files, this includes instructions on how to install the software. Attached to that issue is the setup file (approximately 10Mb). The files can also be obtained in person at one of our ZipSupport Center.

Using the Cisco VPN Client

After installing the Cisco VPN client, launch the client and you will see this screen: VPN main.gif

Click on the New button for a new profile. Click on Group Authentication and use the group name: Zipnet and the password is zippy

Note: If you experience issues with the host "vpn.uakron.edu" try using "130.101.26.149". Note that with "130.101.26.149" you will only have access to on campus resources. External sites/systems will not function (ie: AIM, Google, youtube,etc).

There are known issues with this setup in regards to some library systems (such as OhioLink and Oreilly Books Online). These issues are being reviewed by our networking teams.


Now click on the transport tab. Click on Enable Transport Tunneling and click on IPSec over UDP (NAT/PAT) Then click on the save button.

VPN create new.gifVPN create new transport.gif

After saving the profile, highlight the profile and click on connect. In the authentication box enter University username and password.

VPN UAnet.gif


You will see the securing communication channel and the window will minimize once negotiation is complete. To disconnect just double-click on the lock icon in the tray and click on disconnect

Error Messages

Here is a good list of error codes you may receive with the VPN Client: http://www.ucl.ac.uk/is/roamnet/vpn-errordict.pdf


Error 2738 on Windows Vista If you receive an error "Internal Error 2738", try these directions to potentially resolve the issue:

  1. Run a command prompt in administrator mode (Start/All Programs/Accessories/ right click on Command Prompt, select Run As Administrator)
  2. type: cd %systemroot%\system32
  3. type: regsvr32 vbscript.dll


Error 442 To work around error 442, try the following steps to resolve the issue:

  1. Open "Network and Sharing Center".
  2. Select "Manage Network Connections".
  3. Enable the Virtual Adapter ("VA"—Cisco VPN Adapter).
  4. Right-click on Cisco VPN Adapter and select "Diagnose" from the context menu.
  5. Select "Reset the network adapter Local Area Connection X".


If this procedure does not work, run the following command from the command prompt:

  • reg add HLKM\System\CurrentControlSet\Services\Tcpip\Parameters /v ArpRetryCount /t REGDWORD /d 0 /f


Then reboot.


This resolves the issue until Vista reports a duplicate IP address again. Follow the preceding steps to resolve it again.


If that doesn't work, run the following from cmd.

  • reg add HKLM\System\CurrentControlSet\Services\Tcpip\Parameters /v ArpRetryCount /t REG_DWORD /d 0 /f



If you need help in acquiring the client, please contact the ZipSupport Center @ 330/972-6888 or by Submitting a request via FootPrints for the software.