7 Wireless Config

From The University of Akron Support Wiki
Revision as of 21:13, 6 July 2017 by Jpk34 (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

These are the instructions on how to set up the Wi-Fi on Windows 7


Open the start menu and search for Network and sharing center.

StartMenu networkSharingCenter.png
2. Click on Manage Wireless Networks on the left
Network sharing center.png
3. Remove Rootown from the network list if it's already there. Then click Add. Choose Manually create a network profile
Manually connect.png
4. Enter the information as follows.
  1. If you're on the main part of campus
    1. Network Name: rootown or Roo-Secure
    2. Security Type: wpa2 enterprise
    3. Encryption Type: AES

Click next and choose Change profile settings.

Wireless info.png
5. Click on the Security tab and then click on settings about halfway down the screen.
Wireless network properties.png
6. Uncheck validate server certificate and then click configure near the bottom of the screen. Uncheck the only checkbox in the window that comes up
PEAP properties.png
7. Click Ok twice. Then click the Advanced settings button at the bottom
Windows wifi settings 1.JPG
8. Check the box that says Specify authentication mode and select User authentication from the drop-down menu. Click Save credentials.
Windows wifi settings 2.JPG
9. Enter your UANet ID and password.
Windows wifi settings 3.JPG
10. At this point, click OK until you have closed out of all the windows. Open the network list in your task bar and choose Rootown. Log in with your UANet ID and Password
Wifi menu 7.png