Difference between revisions of "7 Wireless Config"

From The University of Akron Support Wiki
Jump to: navigation, search
Line 43: Line 43:
 
<td valign="top" width="39">5. </td>
 
<td valign="top" width="39">5. </td>
 
<td valign="top" width="408">Click on the '''Secutiry''' tab and then click on '''settings''' about halfway down the screen.  </td>
 
<td valign="top" width="408">Click on the '''Secutiry''' tab and then click on '''settings''' about halfway down the screen.  </td>
<td valign="top" width="151">[[Image:network_sharing_center.png|thumb]]</td>
+
<td valign="top" width="151">[[Image:wireless_network_properties.png|thumb]]</td>
 
</tr>
 
</tr>
  

Revision as of 18:32, 9 April 2014

These are the instructions on how to set up the Wi-Fi on Windows7

1.

Open the start menu and search for Network and sharing center.

StartMenu networkSharingCenter.png
2. Click on Manage Wireless Networks on the left
Network sharing center.png
3. Remove Rootown from the network list if it's already there. Then click Add. Choose Manually create a network profile
Manually connect.png
4. Enter the unformation as follows.
  1. If you're on the main part of campus
    1. Network Name: rootown
    2. Security Type: wpa2 enterprise
    3. Encryption Type: AES
  1. If you're in the dorms:
    1. Network Name: UARH
    2. Security Type: wpa2 enterprise
    3. Encryption Type: AES

Click next and choose Change profile settings.

Wireless info.png
5. Click on the Secutiry tab and then click on settings about halfway down the screen.
Wireless network properties.png
6. Uncheck validate server certificate and then click configure near the bottom of the screen. Uncheck the only checkbox in the window that comes up
PEAP properties.png
7. At this point, click OK until you have closed out of all the windows. Open the network list in your task bar and choose Rootown. Log in with your UANet ID and Password
Wifi menu 7.png