Difference between revisions of "7 Wireless Config"

From The University of Akron Support Wiki
Jump to: navigation, search
Line 53: Line 53:
  
 
<tr>
 
<tr>
<td valign="top" width="39">6. </td>
+
<td valign="top" width="39">7. </td>
 
<td valign="top" width="408">Click '''Ok''' twice. Then click the '''Advanced settings''' button at the bottom</td>
 
<td valign="top" width="408">Click '''Ok''' twice. Then click the '''Advanced settings''' button at the bottom</td>
 
<td valign="top" width="151">[[Image:Windows_wifi_settings_1.JPG‎|thumb]]</td>
 
<td valign="top" width="151">[[Image:Windows_wifi_settings_1.JPG‎|thumb]]</td>
Line 59: Line 59:
  
 
<tr>
 
<tr>
<td valign="top" width="39">7. </td>
+
<td valign="top" width="39">8. </td>
 
<td valign="top" width="408">Check the box that says '''Specify authentication mode''' and select '''User authentication''' from the drop-down menu. Click '''Save credentials'''.</td>
 
<td valign="top" width="408">Check the box that says '''Specify authentication mode''' and select '''User authentication''' from the drop-down menu. Click '''Save credentials'''.</td>
 
<td valign="top" width="151">[[Image:Windows_wifi_settings_2.JPG‎|thumb]]</td>
 
<td valign="top" width="151">[[Image:Windows_wifi_settings_2.JPG‎|thumb]]</td>
Line 65: Line 65:
  
 
<tr>
 
<tr>
<td valign="top" width="39">8. </td>
+
<td valign="top" width="39">9. </td>
 
<td valign="top" width="408">Enter your '''UANet ID''' and '''password'''.</td>
 
<td valign="top" width="408">Enter your '''UANet ID''' and '''password'''.</td>
 
<td valign="top" width="151">[[Image:Windows_wifi_settings_3.JPG‎|thumb]]</td>
 
<td valign="top" width="151">[[Image:Windows_wifi_settings_3.JPG‎|thumb]]</td>
Line 71: Line 71:
  
 
<tr>
 
<tr>
<td valign="top" width="39">7. </td>
+
<td valign="top" width="39">10. </td>
 
<td valign="top" width="408">At this point, click '''OK''' until you have closed out of all the windows. Open the network list in your task bar and choose Rootown. Log in with your UANet ID and Password</td>
 
<td valign="top" width="408">At this point, click '''OK''' until you have closed out of all the windows. Open the network list in your task bar and choose Rootown. Log in with your UANet ID and Password</td>
 
<td valign="top" width="151">[[Image:wifi_menu_7.png|thumb]]</td>
 
<td valign="top" width="151">[[Image:wifi_menu_7.png|thumb]]</td>

Revision as of 19:53, 29 January 2016

These are the instructions on how to set up the Wi-Fi on Windows7

1.

Open the start menu and search for Network and sharing center.

StartMenu networkSharingCenter.png
2. Click on Manage Wireless Networks on the left
Network sharing center.png
3. Remove Rootown from the network list if it's already there. Then click Add. Choose Manually create a network profile
Manually connect.png
4. Enter the information as follows.
  1. If you're on the main part of campus
    1. Network Name: rootown
    2. Security Type: wpa2 enterprise
    3. Encryption Type: AES
  1. If you're in the dorms:
    1. Network Name: UARH
    2. Security Type: wpa2 enterprise
    3. Encryption Type: AES

Click next and choose Change profile settings.

Wireless info.png
5. Click on the Security tab and then click on settings about halfway down the screen.
Wireless network properties.png
6. Uncheck validate server certificate and then click configure near the bottom of the screen. Uncheck the only checkbox in the window that comes up
PEAP properties.png
7. Click Ok twice. Then click the Advanced settings button at the bottom
Windows wifi settings 1.JPG
8. Check the box that says Specify authentication mode and select User authentication from the drop-down menu. Click Save credentials.
Windows wifi settings 2.JPG
9. Enter your UANet ID and password.
Windows wifi settings 3.JPG
10. At this point, click OK until you have closed out of all the windows. Open the network list in your task bar and choose Rootown. Log in with your UANet ID and Password
Wifi menu 7.png