Cisco VPN Client (Configuring)
From The University of Akron Support Center Wiki
| Cisco System VPN Client Software via Footprints [Download for WINDOWS] |
When you start the Cisco VPN client for the first time you may need to create the profile to connect to UA's network.
- Click on the New button for a new profile.
- Click on Group Authentication and use the group name: Zipnet and the password is zippy
- Click on the transport tab. Click on Enable Transport Tunneling and click on IPSec over UDP (NAT/PAT) Then click on the save button.
After saving the profile, highlight the profile and click on connect. In the authentication box enter your [UAnetID] and password.
You will see the securing communication channel and the window will minimize once negotiation is complete. To disconnect just double-click on the lock icon in the tray and click on disconnect
